Specifications
Configuration / project engineering
6.3 Factory default
SCALANCE X-400 BA
106 Operating Instructions, 03/2009, C79000-G8976-C186-07
Applying the slot numbers
1. Place the required slot number in front of the module.
2. Place the tongue in the opening on the module.
3. Press the slot number into the recess on the front of the housing with your finger. The slot
number breaks out of the wheel.
Figure 6-1 Slot number plate
6.3 Factory default
Reset
Note
Resetting the IE Switch X-400 to the factory defaults is described in the section
"SELECT/SET button".
DIL switches (SCALANCE X414-3E only)
When supplied, the four DIL switches on the CPU module are set to
OFF
as default.
NOTICE
Before starting up for the first time, check the switch settings.