Manualshelf

Operating instructions

ManualsBrandsSiemens ManualsSwitchSCALANCE X-100
21222324252627282930
Assembly
4.2 Installation on a DIN rail
SCALANCE X-100
Operating Instructions, 07/2014, A2B00060666-05
29
Uninstalling
To remove the device from the DIN rail, follow the steps below:
1. Disconnect all connected cables.
2. Release the DIN rail catch on the bottom of the device using a screwdriver.
3. Pull the lower part of the device away from the DIN rail.
Figure 4-2 Removal from a 35 mm DIN rail