User Manual

Information on Synco controllers
Our response to energy efficiency
The Synco controllers from Siemens represent an unrivaled response to energy
efficiency in buildings:
– Standard applications of the Synco controller range are classified fully under
European standard EN 15232 ("Energy performance of buildings – Impact of
building automation, controls, and building management).
– eu.bac-certified Synco controllers (Synco RXB, RXL) guarantee tested quality,
control accuracy, and energy performance under European standards and
international test standards.
• Energy performance class A provides for e.g. 30% energy savings in offices as
stipulated in EN 15232.
Energy performance
information
• High control accuracy helps optimize the room climate and prevents
unnecessary changes to the room temperature setpoint. A setpoint reduction by
1 °C already results in up to 6% energy savings. eu.bac-certified controllers
achieve up to 14% energy savings compared to non-certified controllers at a
control accuracy value of 0.1 to 0.2 K depending on climate range.
Synco controller range
– Comprehensive standard controller range for all types of requirements from
heating, ventilating, air conditioning, and refrigeration.
– Communicating controllers for systems (KNX bus): Synco 700.
– Stand-alone controller for small buildings and simple applications: Synco 100
and Synco 200.
– All controllers offer integrated energy savings functions coupled with optimal
prerequisites to achieve energy performance class A.
5