Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
50
NUMBER OF TIMES TO CALL
The Lite system calls the pager the number of times you specify in this field. Repetitive
paging may be useful if the pager is turned off periodically or is out of pager range.
Note: This field is used to tell the Lite system how many successful calls it should
make to the paging service. Do not confuse this with the pager-retry feature. If
the Lite system calls the pager number and does not hear it ring and answer,
then it automatically re-tries the call at 10-second intervals, for a pre-defined
number of times.
MINUTES BETWEEN CALLS
If you enter a number greater than 1 in the TIMES TO CALL field, this field instructs the
Lite system how long it should wait between re-calls.
Note: This field tells the Lite system how long to wait between successful calls to the
paging service. Do not confuse this with the pager-retry feature.
CALL SCHEDULE
The Pager notification feature follows a time schedule. The options are:
Schedule Result
ALWAYS Pager notification is available at all times.
DAY SERVICE Pager notification is available only during day/lunch service, as
defined in the System Information / Business Hours screen.
NIGHT SERVICE Pager notification is available only during non-day/lunch service,
as defined in the System Information / Business Hours screen.
SCHEDULE A, B, C, or D Pager notification is available only during the schedule defined
on Page 3 of the Mail Box setup screen for this mailbox.