Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
48
4. Press <Enter> to move the cursor to the PAGER NUMBER field. If the subscriber is to use
the Paging feature, use the following information to complete this section of the Mail
Box setup screen.
PAGER NUMBER
Enter the telephone number of the paging service. The mailbox owner may change the
number remotely. Normally, access codes for outside lines are not required here.
Instead, that information should be entered on the System Information / General setup
screen.
To restrict pager calls to use lines in a particular line group, enter the letter (A, B, C, or
D) of the line group in braces { } before the telephone number (for example,
{A}5551212).
Tone or Voice pagers may be used with the Message Delivery feature discussed later in
this section.