Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1

5. Repeat steps 3 through 5 for each subscriber mailbox you want to create.

6. Once you create all necessary mailboxes, continue with the next procedure, below.

2.5.6.7 Customizing Subscriber Mailboxes

Using information the system supervisor provides on the Mailbox Setup Worksheets, you can

now customize the mailboxes you created for each subscriber on the system.

The procedure below identifies the fields you should be sure to customize for each mailbox.

Fields that are not specifically discussed contain default values that should be appropriate in

nearly all setup situations. Therefore, it is unlikely that you need to modify these fields.

Detailed information on completing all fields on Mail Box setup screens is provided in the

Installation and Maintenance Manual. You can also access online help on any screen by

pressing <F1>.

1. To access the mailbox you want to customize, press <F4>. A small window displays

prompting you for the box number. Type the box number then press <Enter>. The Mail

Box Page 1 setup screen displays.