Installation manual
LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
43
NO TRANSFER
The Lite system does not transfer the call. Instead, it plays the mailbox owner’s personal
greeting (if one has been recorded) or a system default greeting. The caller then has
several available options before recording a message.
BLIND
The Lite system transfers the call by dialing the number, then dropping out of the call. It
transfers the call without monitoring to check whether the called party is busy, answers,
etc. The final outcome of the call is the total responsibility of telephone system. If the
telephone has transfer-recall capabilities, then if the telephone system transfer-recall
timer expires, the call is returned to the Lite system. (The Lite system cannot perform
call queuing when using Blind call transfers.)
WAIT FOR RING
This is a combination of the Wait For Answer and Blind transfer types. If the called party
is busy, the calling party is offered the same options as with the Wait For Answer transfer
type. If ringing is detected on the line, the Lite system executes a Blind transfer and
drops out of the call. (The Lite system can perform call queuing if the extension is busy.)
WAIT FOR ANSWER
The Lite system dials the number and monitors the line. If the called party is busy, the
Lite system offers the caller options to hold, leave a message, call another extension, etc.
If the called party is not busy, the Lite system monitors the line, waiting for the called
party to answer. If the called party does not answer within a specified number of rings,
the Lite system abandons the transfer and plays the personal greeting, takes a message,
etc. If the called party does answer, the Lite system announces the call “I have a call for
you, <mailbox owner’s name> “ and completes the transfer. (The Lite system can
perform call queuing if the extension is busy.)
SCREEN
This transfer type functions exactly the same way as with the Wait For Answer transfer
type until the called party answers. Once the called party answers, the Lite system plays
a system prompt offering the called party several options:
• Press 1 to accept the call. The parties are connected.










