Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
30
7. To save the information and exit the screen, press <F10>. The System Information
menu displays.
2.5.5.6 Setting Up the Business Hours Screen
1. From the System Information menu, select BUSINESS HOURS. The Business Hours setup
screen displays.
2. For each day of the week, enter the office opening time in the DAY SERVICE BEGINS
field and the office closing time in the DAY SERVICE ENDS field. The default is an office
open time of 8:00 AM and office closing time of 17:00 (5:00 PM). If you want calls to be
handled in the same way day and night, enter 00:00 in the DAY SERVICE BEGINS field,
and 24:00 in the DAY SERVICE ENDS field. Refer to the Business Hours Worksheet
completed by the system supervisor for specific information.
3. To save the information and exit the screen, press <F10>. The System Information
menu displays.
2.5.5.7 Setting Up the Call Transfer Screen
1. From the System Information menu, select CALL TRANSFER. The Call Transfer setup
screen displays.
2. The fields in the top half of the screen list the sequences that the Lite system is to dial to
transfer calls (the “!” signifies hook-flash and the comma signifies pause for one second).
Typically, these settings are appropriate for most telephone systems without any
modification. If you know the actual sequences required by the telephone system, and
they are different from those shown, make the changes as necessary.
3. To save the information and exit the screen, press <F10>. The System Information
menu displays.
2.5.5.8 Setting Up the Class of Service Screen
Each mailbox on the system is assigned a class of service. The class of service assigned to
the box dictates which Lite system features the mailbox owner has access to and how he/she
can use those features.