Environmental Declaration

EPD - Type II
According to ISO 14021
Steel , Cooper , PCB Motors variant
FR4; TBBA; solder SnAgCu PCBA 53g
*Variant parts list
[g]
Total weight of device
Handwheel, ReturnSpringCage
Lower central shaft; div.Gears
Ringgear, Doublegear
Cabling Cover
Lower central shaft
Screws
Valve nut; Spring; Axles; Gears; Lower shaft ; Ball bearing
PlainBearingBush
BearingBush
Motors
Typical energy consumption
[kWh/a]
Packaging
Bag accessorie
3
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may
be mandated by law or ecologically sensible.
Observe all local and applicable laws.
Others
17
10
1
Disposal
PCBAs (Printed Circuit Board
assembled)
45
298
78
41
4
10
305
17
33
173
1'461
221
3
4
26
205
SALxx.xxT20
1'588
218
78
17
47
205
SALxx.xxT10
3
80
SALxx.xxT40
1'589
218
25
205
4
1
4
Comments
71 7331 0562 A 03.09.2013
Regulation (EC) No. 1907/2006 (REACH)
EU-directive 2011/65/EU (RoHS)
The device is free from substances which interfere with lacquer wetting.
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
The device is halogen-free with exception of:
PCB (TBBA); EccentricShaft_LR (PTFE)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent
under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Page 2/2