Specifications

Get a start (quick start - introduction)
6 01.00|FB20|en
Get a start (quick start - introduction)
In this chapter, a project is created by way of example, such as
how a drive module can be designed so that in the end, the drive
module can be controlled via the variable table.
SCHUNK recommends that technicians (particularly those who are
inexperienced) carefully read this chapter and work through it
point by point.
Fig. 1
1 OPENING the SIMATIC Manager
In order to create a new project, the Simatic Manager must be
started.
3
Creating a PLC project