Specifications

About this manual
4 01.00|FB20|en
About this manual
This manual describes the FB20 functional module.
It serves as a drive module to control the Profibus.
Applicable documents
• The FB20 has been developed for the S7-300/400 PLC system of
Siemens AG. Therefore, the documentation of the CPU should
be observed, including the manuals for the STEP7 programming
software.
• The Profibus installation guidelines which were created by the
PNO Profibus user organization must be followed.
• The functions of the drive modules, some of which are trig-
gered by the FB20, are described in the manual "Schunk Mo-
tion Tool, Software Guide".
1
1.1