Specifications

Get a start (quick start - introduction)
32 01.00|FB20|en
3 Selecting the communication hardware
In the example, the interface selected is PLCSIM(MPI).
Select the right interface that is available on your PC/PLC.
The CPU/PLC should be connected.
Fig. 44
4 If there is a connection over the Ethernet, as in this example,
the following interface is recommended:
TCP/IP(Auto) -> VMware Accelerated
Various settings can be made. SCHUNK recommends retaining
the default settings. If no connection to control can be estab-
lished, all the settings have to be checked.