Using your Siemens S55 with the Logitech wireless hub © 2003 Logitech, Inc.
Using your Siemens S55 with the Logitech wireless hub Contents Introduction 3 Product compatibility 3 About this guide 4 Get connected 6 Connecting your Siemens S55 6 Checking if your Siemens S55 is paired or connected 15 Get organized - synchronize! 16 Synchronizing - why, what, and when 17 Checking the OBEX Synchronization settings 19 Synchronizing using the OBEX Synchronization service 20 Synchronizing using the Serial Port service 21 Communicate with co-workers and friends 23 Send a text (SMS) message
Using your Siemens S55 with the Logitech wireless hub Introduction If you have a Siemens S55 mobile phone you can connect it to your computer through the Bluetooth® wireless hub provided with your Logitech® product. Do so and discover what cordless freedom offers: communicate efficiently, share information without wires, save time.
Using your Siemens S55 with the Logitech wireless hub About this guide This guide gets you started using your Siemens S55 mobile phone with your computer. It explains how to connect the two devices, and then how to get organized and communicate. Prerequisites This guide assumes that: • You have installed your Logitech product and the SetPoint™ software. • You have installed the Mobile Phone Suite provided with SetPoint. This is required if you want to send and receive text messages using your computer.
Using your Siemens S55 with the Logitech wireless hub How to use this guide The following symbols are used in this guide: Symbol Explanation Tip - a handy hint that may provide a useful alternative or save time. Note - helpful information that requires your attention. © 2003 Logitech, Inc.
Using your Siemens S55 with the Logitech wireless hub Get connected Connecting your Siemens S55 mobile phone to your computer is easy. A wizard guides you through the steps involved, including discovering your device and pairing it with your computer. The procedure described below for discovering, pairing and setting up services does not actually connect your Siemens S55 and your computer.
Using your Siemens S55 with the Logitech wireless hub You can also start the Bluetooth Setup Wizard by: 3. • Right-clicking the Bluetooth icon, , in the Windows Taskbar and selecting Add a Bluetooth Device from the menu displayed. • Selecting Add a Bluetooth Device from the Bluetooth Tasks panel in the My Bluetooth Places screen in your Windows Explorer (available in Windows XP only). Search for devices. Click Next > to proceed.
Using your Siemens S55 with the Logitech wireless hub 4. Select your mobile phone. Highlight your Siemens S55 and click Next >. You can give your Siemens S55 a name that is personal to you, instead of just ‘SonyEricssonS55’ by scrolling on your phone to Menu Æ Setup Æ Connectivity Æ Bluetooth Æ My BT name and typing in the name you want to use. You have now discovered your Siemens S55 mobile phone! The next step is to pair it with your computer. This is done at the following dialog: 1.
Using your Siemens S55 with the Logitech wireless hub 6. Complete the pairing. On your phone, select OK, type a PIN to match the PIN Code you entered on your computer, and select OK again. You are asked on your mobile phone whether you want to ‘Add device to known device list?’. 7. Confirm the pairing. Select Yes on your mobile phone to accept this request.
Using your Siemens S55 with the Logitech wireless hub 8. Select the Serial Port service. Do this by checking SerialPort box. The following dialog is shown: To encrypt information you transfer, check this box. Make a note of the COM Port used for the SerialPort service. To make sure that the connection between your Siemens S55 and computer is secure (the data is encrypted), check the Secure Connection box. Make a note of the COM Port used by the SerialPort service for your Siemens S55.
Using your Siemens S55 with the Logitech wireless hub 9. Select the OBEX File Transfer service. You do this by checking the OBEX File Transfer box. The following dialog is displayed: To encrypt information you transfer, check this box. To make sure that the connection between your Siemens S55 and computer is secure (the data is encrypted), check the Secure Connection box. When you’ve finished the changes, click OK. You return to the Bluetooth Service Selection dialog. © 2003 Logitech, Inc.
Using your Siemens S55 with the Logitech wireless hub 10. Select the OBEX Object Push service. You do this by checking the OBEX Object Push box. The following dialog is displayed: To encrypt information you transfer, check this box. Specify settings in these fields to suit your requirements. To make sure that the connection between your Siemens S55 and computer is secure (the data is encrypted), check the Secure Connection box.
Using your Siemens S55 with the Logitech wireless hub 11. Select the OBEX Synchronization service. You do this by checking the OBEX Synchronization box. The following dialog is displayed: To encrypt information you transfer, check this box. Specify settings to suit your requirements. To make sure that the connection between your Siemens S55 and computer is secure (the data is encrypted), check the Secure Connection box. The options you specify in the other fields depend on your requirements.
Using your Siemens S55 with the Logitech wireless hub A device icon for the Siemens S55 is created in your Bluetooth Neighborhood. To see the device icon: 1. Double-click the Bluetooth icon, , in the Windows Taskbar. The Explore My Bluetooth Places window is displayed. 2. Select Entire Bluetooth Neighborhood if you are using Windows 2000, or View devices in range if you are using Windows XP. The following window is displayed: Your Siemens S55 mobile phone device icon.
Using your Siemens S55 with the Logitech wireless hub Checking if your Siemens S55 is paired or connected If you want to find out whether your Siemens S55 mobile phone is paired or connected, you can do so by looking in My Bluetooth Places and locating the device icon for your Siemens S55.
Using your Siemens S55 with the Logitech wireless hub Get organized - synchronize! Having paired your Siemens S55 mobile phone with your computer, you’re able to synchronize the contact information it contains and the contact information on your computer. (If you haven’t paired the device yet, see Connecting your Siemens S55, page 6.) This keeps both devices up-to-date without having to key in all the details twice.
Using your Siemens S55 with the Logitech wireless hub Synchronizing - why, what, and when Wondering what synchronizing is all about... why you may want to do it, what gets synchronized, and how often? Read on… Why should I synchronize? First of all, synchronizing is easy and can save you lots of time. And, thanks to your Logitech wireless hub, it can be done quickly and simply without wires or cables, so there’s no need to plug your Siemens S55 into your computer.
Using your Siemens S55 with the Logitech wireless hub During the synchronization process, if an item is on your computer but not on your Siemens S55 (or the other way round), then it is created on your Siemens S55 (or computer) during synchronization. What’s more, if an item has been updated on either device it is automatically updated on the other device. It’s totally up to you how much data you choose to synchronize.
Using your Siemens S55 with the Logitech wireless hub Checking the OBEX Synchronization settings If you want to check and change the synchronization settings for OBEX synchronization, follow the steps below: 1. 2. Go to My Bluetooth Places. The easiest way to do this is by double-clicking the Bluetooth icon, the Windows Taskbar. , in Display the synchronization settings. Right-click the Siemens S55 OBEX Synchronization shortcut and select Properties.
Using your Siemens S55 with the Logitech wireless hub Synchronizing using the OBEX Synchronization service To synchronize your Siemens S55 and your computer using the OBEX Synchronization service: 1. Connect your mobile phone and computer. Make sure that your Siemens S55 is paired to your computer. See the section Connecting your Siemens S55, page 6. 2. Display the device icon for your mobile phone.
Using your Siemens S55 with the Logitech wireless hub Synchronizing using the Serial Port service To synchronize your Siemens S55 and your computer using the Serial Port service: 1. Install SyncTool. Make sure you have installed SyncTool for your Siemens S55 mobile phone. Refer to the CD provided with your Siemens S55 mobile phone for more information.
Using your Siemens S55 with the Logitech wireless hub 8. Start the synchronization process. To do this click Synchronize. During the synchronization process you are asked to confirm whether you want to update the records on both your Siemens S55 and your computer, or just on your computer, or just on your mobile phone. Simply follow the instructions on screen. The synchronization starts and a progress bar is displayed. When the synchronization is complete, a confirmation message dialog is displayed: 9.
Using your Siemens S55 with the Logitech wireless hub Communicate with co-workers and friends Once you have discovered your Siemens S55 mobile phone and paired it with your computer you can use your computer as your mobile phone’s interface to create text messages and access the phone book on your mobile phone. Text messages are also known as Short Message Service (SMS) messages. How do you do this? Simple - use the Mobile Phone Suite program provided with your SetPoint software.
Using your Siemens S55 with the Logitech wireless hub Send a text (SMS) message To send a text (SMS) message: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer (for example by checking that the device icon has a check mark). See the section Connecting your Siemens S55, page 6. 2. Open your Mobile Phone Suite inbox.
Using your Siemens S55 with the Logitech wireless hub 3. Create a new message. To do this, click New, , to open the Compose new SMS message window, which you can use to write the text message and select the contact you want to send it to. The Compose new SMS message window is displayed: Click this button to send the text message. Type the message here. Click this button to select recipients. 4. Type the message. Use the panel in the lower half of the window. 5. Select recipients.
Using your Siemens S55 with the Logitech wireless hub 6. Choose which contacts are to receive the message. To select the mobile phone number of the person you want to send the text message to, scroll through your list of contacts in the left-hand panel of the Select the Recipients dialog until you find the one you want. Highlight it and click to display their details in the right-hand panel. You can repeat this to send the same text message to more than one person.
Using your Siemens S55 with the Logitech wireless hub Read a text (SMS) message To read a text (SMS) message you have received via your mobile phone: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer. See the section Connecting your Siemens S55, page 6. 2. Open your Mobile Phone Suite inbox. To read a text message the first thing you must do is open the Inbox for the Mobile Phone Suite.
Using your Siemens S55 with the Logitech wireless hub Receive notification of a new text (SMS) message To receive notification of a new text (SMS) message on your mobile phone in the Windows Taskbar on your computer: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer. See the section Connecting your Siemens S55, page 6. 2. Choose the notification option.
Using your Siemens S55 with the Logitech wireless hub Back-up the phone book on your mobile phone To back-up the phone book on your mobile phone to your computer: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer. See the section Connecting your Siemens S55, page 6. 2. Open your Mobile Phone Suite inbox. The easiest way to do this is to double-click the Mobile Phone Suite icon in the Windows Taskbar.
Using your Siemens S55 with the Logitech wireless hub 3. Display your contacts. Click Contacts, , to display the Phonebook window which you can use to back-up your phone book. The Phonebook window is displayed: Click here to start the back-up. 4. Start the back-up. Click Read, progress: . The back-up is started. A dialog is displayed showing its When the back-up of the phone book on your mobile phone is complete this dialog is closed.
Using your Siemens S55 with the Logitech wireless hub Share your pictures Once you have paired and connected your Siemens S55, why not personalize it with your favorite photograph or transfer photographs you have taken with your Siemens S55 to share with your friends. How do you do this? … By transferring pictures between your computer and your Siemens S55. This is easy with your Logitech wireless hub.
Using your Siemens S55 with the Logitech wireless hub Transfer pictures from your computer to your Siemens S55 To copy pictures from your computer to your Siemens S55 mobile phone: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer. See the section Connecting your Siemens S55, page 6. 2. Locate the picture. In Windows Explorer browse to find the picture you want to transfer to your mobile phone. 3. Send the picture.
Using your Siemens S55 with the Logitech wireless hub Transfer pictures from your Siemens S55 to your computer To copy pictures from your Siemens S55 mobile phone to your computer: 1. Connect your phone. Make sure that your Siemens S55 is paired and connected to your computer. See the section Connecting your Siemens S55, page 6. 2. Locate the picture. On your Siemens S55 mobile phone browse and open the picture you want to transfer to your computer. 3. Send the picture.
Using your Siemens S55 with the Logitech wireless hub Learn more about connecting This section contains other information that may be useful to you regarding pairing, disconnecting, and unpairing your mobile phone. Pairing your Siemens S55 on request If you skip the pairing process during the initial connection procedure, then when you try to later synchronize your Siemens S55 with your computer, you are requested by Bluetooth to pair the two devices. You must do this before you can synchronize.
Using your Siemens S55 with the Logitech wireless hub 4. Complete the pairing. On your phone, select OK, type a PIN to match the PIN Code you entered on your computer, and select OK again. The message ‘Add device to known device list?’ is displayed on your Siemens S55. 5. Confirm the pairing. Select Yes on your mobile phone to accept the request. Your computer and Siemens S55 are now paired.
Using your Siemens S55 with the Logitech wireless hub To unpair your Siemens S55 from your computer: 1. View the devices. To do this, go to My Bluetooth Places. The easiest way to do this is by double-clicking the Bluetooth icon, , in the Windows Taskbar, and then either selecting View devices in range (Windows XP) or Entire Bluetooth Neighborhood (Windows 2000). 2. Unpair the device. Right-click the device icon for the Siemens S55 and select Unpair device.
Using your Siemens S55 with the Logitech wireless hub Troubleshooting If you are experiencing difficulties connecting or using your Siemens S55, check whether your problem is listed below. If it is, try the suggestions made to resolve the problem. I can’t pair my Siemens S55 with my computer There are various reasons why your Siemens S55 and computer may not pair: • Your Siemens S55 may have come out of discoverable mode. • Your Siemens S55 may be out of range.
Using your Siemens S55 with the Logitech wireless hub I’m having problems synchronizing If you are getting errors when synchronizing, try the following: • Make sure that your Siemens S55 is not connected to another Bluetooth device. You cannot synchronize unless your Siemens S55 is connected to your computer only. • Check that your Siemens S55 is paired to your computer before you start synchronization.