Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
97
2.4.2.26 AT^SPST
AT^SPST Play Signal Tone
Test command
AT^SPST =?
Response
^SPST: (list of supported <n>s)
OK
Write command
AT^SPST =<n>,<m>
Response
OK/ERROR/+CME ERROR
Parameter
<n>
Type of Signal Tone (st = self terminating)
0 Carkit PTT (st)
1 Carkit PTT long (st)
2 Carkit Crash (st)
3 Carkit Error (st)
4 Carkit Call Setup (st)
<m>
Mode
0 Stop tone (not necessary for self terminating tones)
1 Play tone
2.4.2.27 AT^SPWD
AT^SPWD Change password to a lock (including user-defined locks)
Test command
AT^SPWD=?
Response
^SPWD: list of supported (<fac>, <pwdlength>)s
OK/ERROR/+CME ERROR
Parameter
<fac>
P2
PIN2
PS
Phone locked to SIM (device code)
SC
SIM card (PIN)
AO
BAOC (bar all outgoing calls)
OI
BOIC (bar outgoing international calls)
OX
BOIC-exHC (bar outgoing international calls except to
home country)
AI
BAIC (bar all incoming calls)
IR
BIC-Roam (bar incoming calls when roaming outside
the home country)
AB
All barring services
AG
All outgoing barring services
AC
All incoming barring services
PN
Network personalization (GSM 02.22, [4])
PC
Corporate personalization (GSM 02.22, [4])
PU
Network subset personalization (GSM 02.22, [4])
PP
Service provider personalization (GSM 02.22, [4])
PF
Phone locked to very first inserted SIM
<pwdlength>
Length of password
Write command
AT^SPWD = <fac>,<oldpwd>, <newpwd>
Parameter
<fac>
See Test command
<oldpwd>
Old password
<newpwd>
New password
Response
OK/ERROR/+CME ERROR