Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
93
2.4.2.16 AT^SMSO
AT^SMSO Switch device off
Test command
AT^SMSO=?
Response
OK
Execute command
AT^SMSO
Response
OK Device switches off
2.4.2.17 AT^SNFS
AT^SNFS Select NF hardware
Test command
AT^SNFS=?
Response
^SNFS: (list of supported <dev>s)
Parameter
<dev>
0
Cell phone mode
1
Handsfree
Read command
AT^SNFS?
Response
^SNFS: <dev>
Parameter
<dev>
See Test command
Note:
Volume should be temporarily set to “0” before NF hardware
is changed.
Write command
AT^SNFS=<dev>
Parameter
<dev>
See Test command
Response
OK/ERROR
2.4.2.18 AT^SNFV
AT^SNFV Set the volume
Test command
AT^SNFV=?
Response
^SNFV: (list of supported <vol>s)
Parameter
<vol>
Value range of volume (0 to 4)
0 Low volume
1
2
3
4 max. volume (approx. 3 dB/level)
Read command
AT^SNFV?
Response
^SNFV: <vol>
Parameter
<vol>
See Test command
Write command
AT^SNFV=<vol>
Parameter
<vol>
See Test command
Response
OK/ERROR