Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
91
Cont.
Response
If <mode>=2 and command is successful
^SLCK: <status>[,<class1>[<CR><LF>
^SLCK: <status>, class2....]]
OK/ERROR/+CME ERROR
Parameter
<status>
0 Off
1 On
2.4.2.12 AT^SLNG
AT^SLNG Language settings
Test command
AT^SLNG=?
Response
^SLNG: (list of supported languages <lng>s)
Parameter:
<lng>
Integer; language coded according to GSM 03.38 or mobile-
specific language (>100)
Read command
AT^SLNG?
Response
^SLNG: <lng>
Write command
AT^SLNG=<lng>
Response
OK/ERROR/+CME ERROR
2.4.2.13 AT^SMGL
AT^SMGL
List SMS (without status change from unread to read)
Revision according to GSM 07.05 Version 4.7.0
Test command
AT^SMGL=?
Response
^SMGL: (list of supported <stat>s)
Parameter
<stat>
0 REC UNREAD received unread messages (default)
1 REC READ received read messages
2 STO UNSENT stored unsent messages
3 STO SENT stored sent messages
4 ALL all messages
Write command
AT^SMGL [=<stat>]
Response
If PDU mode (+CMGF=0) and command is successful:
^SMGL: <index>,<stat>,[<alpha>],<length>
<CR><LF><pdu>
[<CR><LF>^SMGL: <index>,<stat>,[alpha],<length>
<CR><LF><pdu>
[...]]
Parameter
<stat>
See Test command
<pdu>
The PDU begins with the service-center address (according to
GSM 04.11), followed by the TPDU according to GSM 03.40 in
hexadecimal format
otherwise:
+CMS ERROR: <err>