Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
90
2.4.2.11 AT^SLCK
AT^SLCK Switch locks (including user-defined locks) on and off
Test command
AT^SLCK=?
Response
^SLCK: (list of supported <fac>s)
OK/ERROR/+CME ERROR
Parameter
<fac>
PS Phone locked to SIM (device code)
SC SIM card (PIN)
FD FDN lock
AO BAOC (bar all outgoing calls)
OI BOIC (bar outgoing international calls)
OX BOIC-exHC (bar outgoing international calls except to home
country)
AI BAIC (bar all incoming calls)
IR BIC-Roam (bar incoming calls when roaming outside the
home country)
AB All barring services
AG All outgoing barring services
AC All incoming barring services
PN Network personalization (GSM 02.22, [4])
PC Corporate personalization (GSM 02.22, [4])
PU Network subset personalization (GSM 02.22, [4])
PP Service provider personalization (GSM 02.22, [4])
PF Phone locked to very first inserted SIM
Write command
AT^SLCK = <fac>, <mode>
[,<passwd>
[,<class>]]
Parameter
<fac>
See Test command
<mode>
0 Cancels lock
1 Activates lock
2 Queries lock status
<passwd>
Password
<class>
1 Voice
2 Data
4 Fax
7 Voice, Data and FAX (default)
8 SMS
16 data circuit sync
32 data circuit async
64 dedicated packet access
128 dedicated PAD access
X combination of some of the above classes, e.g. 255
regroups all classes and 5 regroups Voice and FAX
Cont. Next page