Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
87
2.4.2.4 AT^SCID
AT^SCID Output card ID
Test command
AT^SCID=?
Response
OK/ERROR/+CME ERROR
Execute command
AT^SCID
Response
^SCID: <cid>
OK/ERROR/+CME ERROR
Parameter
<cid>
Number of SIM card
2.4.2.5 AT^SCKS
AT^SCKS Output SIM card status
Test command
AT^SCKS=?
Response
^SCKS: (list of supported <n>s)
Parameter
<n>
0
Suppresses the unsolicited messages
1
Displays the unsolicited messages
Read command
AT^SCKS?
Response
^SCKS: <n>, <m>
Parameter
<m>
0
No card
1
Card in card reader
Write command
AT^SCKS=<n>
Parameter
<n>
See Test command
Response
OK/ERROR
Unsolicited message
^SCKS: <m>
2.4.2.6 AT^SCNI
AT^SCNI Output call number information
Test command
AT^SCNI=?
Response
OK
Execute command
AT^SCNI
Response
^SCNI: 1[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 2[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 3[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 4[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 5[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 6[,<cs>[,<number>,<type>]]<CR><LF>
^SCNI: 7[,<cs>[,<number>,<type>]]
OK/ERROR/+CME ERROR
Parameter
<cs>
Call status of affiliated call number ( first parameter)
0 Call on hold
1 Active call
2 Waiting call
<number>
Telephone number
<type>
Type of number