Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
83
2.4.1.2 AT+IPR
AT+IPR Fixed DTE rate
Test command
AT+IPR=?
Response
+IPR:(list of fixed-only <rate> values)
OK/ERROR/+CME ERROR
Parameter:
<rate>
bits per second at which the DTE-DCE interface should operate
Read command
AT+IPR?
Response
+IPR: <rate>
OK/ERROR/+CME ERROR
Parameter
<rate>
See Test command
Write command
AT+IPR=<rate>
Response
OK/ERROR/+CME ERROR
Write command
AT+IPR=<rate>
Parameter
<rate>
See Test command