Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
76
Cont.
*) Note:
Only the default value needs to be implemented.
Use test command to check which parameter values are in
fact possible!
Read command
AT+FDIS?
Response
<cdec> OK
Parameter
VR
See Test command
BR
See Test command
WD
See Test command
LN
See Test command
DF
See Test command
EC
See Test command
BF
See Test command
ST
See Test command
Write command
AT+FDIS=<VR>,<BR>,<WD>,<LN>,<DF>,<EC>,<BF>,<ST>
Response
+FDIS: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list of
<DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
See Test command
BR
See Test command
WD
See Test command
LN
See Test command
DF
See Test command
EC
See Test command
BF
See Test command
ST
See Test command
2.3.11.11 AT+FDR
AT+FDR Begin or continue phase C data reception
Execute command
AT+FDR
Used for FAX class 2 only
This command initiates transition to Phase C data reception.
Response
CONNECT/OK/ERROR