Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
73
2.3.11.8 AT+FDCC
AT+FDCC Select service for MO SMS messages
This command allows the connected application to sense and constrain
the capabilities of the facsimile DCE (=ME), from the choices defined in
ITU T.30 Table 2.
Used for Faxclass 2 only
Test command
AT+FDCC=?
Response
+FDCC: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list
of <DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
Vertical Resolution
BR
Bit rate
WD
Page Width
LN
Page length
DF
Data compression Format
EC
Error Correction mode
BF
Binary File transfer mode
ST
Scan Time / line
Note:
For further information see AT+FDIS
Read command
AT+FDCC?
Response
<dcc>
OK
Parameter
VR
See Test command
BR
See Test command
WD
See Test command
LN
See Test command
DF
See Test command
EC
See Test command
BF
See Test command
ST
See Test command
Write command
AT+FDCC=<VR>,<BR>,<WD>,<LN>,<DF>,<EC>,<BF>,<ST>
Response
+FDCC: (list of <VR>s), (list of <BR>s), (list of <WD>s), (list of <LN>s), (list
of <DF>s), (list of <EC>s), (list of <BF>s), (list of <ST>s)
Parameter
VR
See Test command
BR
See Test command
WD
See Test command
LN
See Test command
DF
See Test command
EC
See Test command
BF
See Test command
ST
See Test command