Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
64
2.3.9.12 AT+CPMS
AT+CPMS Preferred SMS message storage
Revision according to GSM 07.05 Version 4.7.0
Test command
AT+CPMS=?
Response
+CPMS: (list of supported <mem1>s),( list of supported <mem2>s) ,(list of supported
<mem3>s)
Parameter
<mem1>
Memory from which messages are read and deleted
SM
SIM message storage
ME
Mobile Equipment message storage
MT
Any of the storages associated with ME
<mem2>
Messages will be written and sent to this memory storage:
SM
SIM message storage
ME
Mobile Equipment message storage
MT
Any of the storages associated with ME
<mem3>
Memory in which received messages are stored, if routing to TE is not
set (see AT+CNMI command with parameter <mt>=2)
MT
Any of the storages associated with ME
Read command
AT+CPMS?
Response
+CPMS:
<mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,<mem3>,<used
3>,<total3>
Parameter
<memx>
Memory from which messages are read and deleted
<usedx>
Number of messages currently in <memx>
<totalx
>
Total number of messages that can be stored in <memx>
Write command
AT+CPMS= <mem1>[,<mem2>[,<mem3>]]
Parameter
<mem1>
See Test command
<mem2>
See Test command
<mem3>
See Test command
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK/ERROR/+CMS ERROR
Notes
1)
The Mobil Equipment storage "ME" has space for 25 short messages
2)
The storage "MT" is an addition of the storages "ME" and "SM". If "MT" is
chosen as <mem1> or <mem2> the first indices to read from, write to or delete
from is the "ME" storage. The storages with index 26 or higher are associated
with the "SM" storage.
3)
Incoming short messages with message class 1 or 2 (see GSM 03.38) will be
stored in the "ME" or "SM" storage only. Therefore, the AT^SMGO:2
indication (see AT^SMGO command) can occur without a preceding
AT^SMGO:1 indication.