Specifications

AT command set for S45 Siemens mobile phones and modems

_________________________________________________________________________________________

__________________________________________________________________________________________

Siemens Document No.: A30880-A10-A001-3-D376

Revision: 1.8

Revision Date: 30. November, 2001

1.6.2 Related Standardisation documentation

The following standardisation documents are related to the current document

[1] Digital cellular telecommunications system (Phase 2+);AT command set for GSM Mobile

Equipment (ME) (GSM 07.07 version 6.4.0 Release 1997)

Reference No.: RTS/SMG-040707Q6R3

[2] Digital cellular telecommunications system (Phase 2+);Use of Data Terminal Equipment -

Data Circuit terminating Equipment (DTE - DCE) interface for Short Message Service

(SMS) and Cell Broadcast Service (CBS) (GSM 07.05 version 6.0.0 Release 1997)

Reference No.: DTS/SMG-040705Q6

[3] ITU-T Draft new Recommendation V.25ter “Serial asynchronous automatic dialling and

control”

[4] “Digital cellular telecommunication system (Phase 2+); Personalisation of GSM Mobile

Equipment (ME) Mobile functionality specofocation” (GSM 02.22)

[5] “Digital cellular telecommunication system (Phase 2+); Specification of the Subscriber

Identification Module – Mobile Equipment (SIM-ME) interface” (GSM 11.11)

[6] “Facsimile Digital Interfaces – Asynchronous Facsimile DCE Control Standard, Service

Class 1(TIA/EIA-578-A), May 1995

[7] Standards Proposal No. 2388, Proposed New Standard “Asynchronous Facsimile DCE

Control Standard” (if approved, to be published as EIA/TIA-592), October 1990

GSM04.11

GSM03.40

1.6.3 Change Requests related to the feature

The following new change requests are taken into account in this document: none