Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
53
Write command (cont.)
AT+CGQREQ=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameter
<cid>
See Read command
<PDP_type>
See Test command
<precedence>
See Test command
<delay>
See Test command
<reliability>
See Test command
<peak>
See Test command
<mean>
See Test command
Response
OK/ERROR/+CME ERROR
2.3.6.11 AT+CGPADDR
AT+CGPADDR Show PDP address
Test command
AT+CGPADDR=?
Response
+CGPADDR: (list of defined <cid>s)
OK/ERROR/+CME ERROR
Parameter
<cid>
numeric PDP Context Identifier
Write command
AT+CGPADDR=[<L2P> ,[<cid> [,<cid> [,…]]]]
Parameter
<L2P>
layer 2 protocol to be used between the TE and MT
PPP
<cid>
numeric PDP Context Identifier
Response
+CGPADDR::
<cid>,<PDP_addr>[<CR><LF>+CGPADDR:<cid>,<PDP_ad
dr>[...]]
OK/ERROR/+CME ERROR