Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
52
2.3.6.10 AT+CGQREQ
AT+CGQREQ Quality of Service Profile (Requested)
Test command
AT+CGQREQ=?
Response
+CGQREQ: <PDP_type>, (list of supported <precedence>s), (list of
supported <delay>s), (list of supported <reliability>s) ,
(list of supported <peak>s), (list of supported <mean>s)
[<CR><LF>>+CGQREQ: <PDP_type>, <precedence >,
<delay>, <reliability>, <peak>, <mean>[…]]
OK/ERROR/+CME ERROR
Parameter
<PDP_type>
string parameter of Packet Data Protocol type
PPP
IP
<precedence>
numeric parameter for the precedence class
0 network subscribed value
1 .. 3
<delay>
numeric parameter for the delay class
0 network subscribed value
1 .. 4
<reliability>
numeric parameter for the reliability class
0 network subscribed value
1..5
<peak>
numeric parameter for the peak throughput
class
0 network subscribed value
1 .. 7
<mean>
numeric parameter for the mean throughput
class
0 network subscribed value
1..12
Read command
AT+CGQREQ?
Response
+CGQREQ: <cid>, <precedence >, <delay>, <reliability>,
<peak>, <mean>[<CR><LF>+CGQREQ: <cid>,
<precedence >, <delay>, <reliability.>, <peak>,
<mean>[…]]
OK/ERROR/+CME ERROR
Parameter
<cid>
numeric PDP Context Identifier
<PDP_type>
See Test command
<precedence>
See Test command
<delay>
See Test command
<reliability>
See Test command
<peak>
See Test command
Cont. Next page
<mean>
See Test command