Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
51
2.3.6.9 AT+CGQMIN
AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Test command
AT+CGQMIN=?
Response
+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of supported
<delay>s), (list of supported <reliability>s) , (list of supported
<peak>s), (list of supported <mean>s)
[<CR><LF>+CGQMIN: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of supported
<reliability>s) , (list of supported <peak>s), (list of supported
<mean>s)[…]]
OK/ERROR/+CME ERROR
Parameter
<PDP_type>
string parameter of Packet Data Protocol type
PPP
IP
<precedence>
numeric parameter for the precedence class
0 network subscribed value
1 .. 3
<delay>
numeric parameter for the delay class
0 network subscribed value
1 .. 4
<reliability>
numeric parameter for the reliability class
0 network subscribed value
1..5
<peak>
numeric parameter for the peak throughput class
0 network subscribed value
1 .. 7
<mean>
numeric parameter for the mean throughput class
0 network subscribed value
1..12
Read command
AT+CGQMIN?
Response
+CGQMIN:<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>[<CR><LF>
+CGQMIN:<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>[…]]
OK/ERROR/+CME ERROR
Parameter
<cid>
numeric PDP Context Identifier
<PDP_type>
See Test command
<precedence>
See Test command
<delay>
See Test command
<reliability>
See Test command
<peak>
See Test command
<mean>
See Test command
Write command
AT+CGQMIN=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameter
<cid>
See Read command
<PDP_type>
See Test command
<precedence>
See Test command
<delay>
See Test command
<reliability>
See Test command
<peak>
See Test command
<mean>
See Test command
Response
OK/ERROR/+CME ERROR