Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
50
2.3.6.8 AT+CGEREP
AT+CGEREP GPRS event reporting
Test command
AT+CGEREP=?
Response
+CGEREP: (list of supported <mode>s),(list of supported <bfr>s)
OK/ERROR/+CME ERROR
Parameter
<mode>
numeric parameter
0
buffer unsolicited result codes in the MT; if MT
result code buffer is full, the oldest ones can be
discarded. No codes are forwarded to the TE
1
discard unsolicited result codes when MT-TE link
is reserved (e.g. in on-line data mode); otherwise
forward them directly to the TE
2
buffer unsolicited result codes in the MT when
MT-TE link is reserved (e.g. in on-line data mode)
and flush them to the TE when MT-TE link
becomes available; otherwise forward them
directly to the TE
<bfr>
numeric parameter
0
MT buffer of unsolicited result codes defined
within this command is cleared when <mode> 1
or 2 is entered
1
MT buffer of unsolicited result codes defined
within this command is flushed to the TE when
<mode> 1 or 2 is entered
Read command
AT+CGEREP?
Response
+CGEREP: <mode>,<bfr>
OK/ERROR/+CME ERROR
Parameter
<mode>
See Test command
<bfr>
See Test command
Write command
AT+CGEREP=[<mode>[,<bfr>]]
Response
OK/ERROR/+CME ERROR
Parameter
<mode>
See Test command
<bfr>
See Test command
Unsolicited message:
+CGEV: REJECT <PDP_type>, <PDP_addr>
+CGEV: NW REACT <PDP_type>, <PDP_addr>
+CGEV: NW DEACT <PDP_type>, <PDP_addr>
+CGEV: ME DEACT <PDP_type>, <PDP_addr>
+CGEV: NW DETACH
+CGEV: ME DETACH
+CGEV: NW CLASS <class>
+CGEV: ME CLASS <class>