Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
41
2.3.4.12 AT+CPIN
AT+CPIN
Enter PIN and query lock
Test command
AT+CPIN=?
Response
OK
Read command
AT+CPIN?
Response
+CPIN: <code>
OK/ERROR/+CME ERROR
Parameter
<code>
READY
No further input necessary
SIM PIN
SIM PIN input necessary
SIM PUK
SIM PUK input necessary
PH-SIM PIN
Device code (theft protection) input necessary
PH-SIM PUK
Device code PUK (theft protection) input
necessary
SIM PIN2
PIN2, e.g. for editing the FDN book;
only possible if previous command was
acknowledged with +CME ERROR:17
SIM PUK2
Only possible if previous command was
acknowledged with error +CME ERROR:18
device specific codes (SIM LOCK):
PH-FSIM PIN
There is no current PIN
PH-FSIM PUK
Phone locked to very first inserted SIM
PH-NET PIN
There is no current PIN
PH-NET PUK
Network Personalization is actually a PUK
PH-NETSUB PIN
There is no current PIN
PH-NETSUB PUK
Network Subset Personalization is actually a
PUK
PH-SP PIN
There is no current PIN
PH-SP PUK
Network Personalization is actually a PUK
PH-CORP PIN
There is no current PIN
PH-CORP PUK
Network Personalization is actually a PUK
The required error message can (must) be
provoked by an attempted Write command
Write command
AT+CPIN=<pin>[,<new pin>]
Parameter
<pin>
Password for appropriate lock; if the lock is a
PUK, then a <new pin> is necessary.
<new pin>
New password for the lock
Response
OK/ERROR/+CME ERROR