Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
38
2.3.4.9 AT+CPBR
AT+CPBR Read a telephone-book entry
Test command
AT+CPBR=
?
Response
+CPBR: (list of supported <index>s), <nlength>, <tlength>
OK/ERROR/+CME ERROR
Parameter
<index>
Location number
<nlength>
Max. length of telephone number
<tlength>
Max. length of text corresponding to the number
Write command
AT+CPBR=<index1>[,<index2>]
Response
+CPBR: <index1>, <nummer>, <typ>, <text>[<CR><LF>
+CPBR: .....
+CPBR: <index2>, <nummer>, <typ>, <text>]
OK/ERROR/+CME ERROR
Parameter
<index1>
Location number where the read of the entry starts
<index2>
Location number where the read of the entry ends
<nummer>
Telephone number
<typ>
Type of number
<text>
Text corresponding to the telephone number
NOTE:
In the <text> field, special characters like the following may appear
‘"‘ (0x22), ‘@‘ (0x00), ‘ò` (0x08), `Ö` (0x5c).
See also section AT+CPBW and Appendix A: “Using special characters
in certain commands ( e. g., +CPBR/+CPBW”.
Empty entries do not produce any output in models succeeding the S25