Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
30
2.3.3.12 AT+COPS
AT+COPS Commands concerning selection of network operator
Test command
AT+COPS=?
Response
+COPS: [list of supported (<stat>,long alphanumeric
<oper>,,numeric <oper>)s][,,( list of supported
<mode>s),( list of supported <format>s)]
OK/ERROR/+CME ERROR
Parameter
<stat>
0
Unknown
1
Useful network operator
2
Used network operator
3
Prohibited network operator
<oper>
Operator in the format according to <mode>
<mode> 0
Automatic mode
1
Manual selection of network operator
3
Setting of format
4
Automatic, manual selected
<format> 0
Long alphanumeric
2
Numeric <oper>
Read command
AT+COPS?
Response
+COPS: <mode>[,<format>,<oper]
OK/ERROR/+CME ERROR
Parameter
<mode>
See Test command
<format>
See Test command
<oper>
Network operator
Write command
AT+COPS=<mode>[,<format>[,<oper>]]
Parameter
<mode>
See Test command
<format>
See Test command
If <mode> = 1, <format> can only = 2
<oper> In numeric form only
Response
OK/ERROR/+CME ERROR