Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
29
2.3.3.10 AT+COLP
AT+COLP Connected Line Identification Presentation
Test command
AT+COLP=?
Response
+COLP: (list of supported <n>s)
OK/ERROR/+CME ERROR
Parameter
<n>
0 Disable
1 Enable
Read command
AT+COLP?
Response
+COLP: <n>, <m>
OK/ERROR/+CME ERROR
Parameter
<n>
See Test command
<m>
0
COLP not provisioned (no presentation)
1
COLP provisioned
2
Unknown
Write command
AT+COLP=[<n>]
Parameter
<n>
See Test command
Response
OK/ERROR/+CME ERROR
Unexpected message
+COLP: <num>,<type>
2.3.3.11 AT+COPN
AT+COPN Read operator names
Test command
AT+COPN=?
Response
OK
Execute command
AT+COPN
Response
+COPN:numeric <oper>,long alphanumeric <oper><CR><LF>
+COPN:.....
OK/ERROR/+CME ERROR
Parameter
<oper>
Network operator in numeric and alphanumeric notation see
AT^SPLM