Specifications

AT command set for S45 Siemens mobile phones and modems
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November.2001
117
3.4 List of keys implemented for AT+CKPD
The following keas are implemented for the AT+CKPD command:
Character Comment
’#’ hash
’*’ star
0..9 number keys
E/e connection end (END)
C/c clear display (C/CLR)
S/s connection start (SEND)
W/w pause character
Y/y delete last character (C)
’V’ navi down
’^’ navi up
’<’ navi left
’>’ navi right
’[’ soft key 1
’]’ soft key 2
’:’ escape character for manufacturer specific keys
Siemens specific keys
’+’ left side key up
’-’ left side key down
M right side key
3.5 Result codes
Table 3-10 lists the numbers of result codes and provides their meaning:
Indication Numeric Meaning
OK 0 Command executed, no errors, Wake up after reset
CONNECT 1 Link established
RING 2 Ring detected
NO CARRIER 3 Link not established or disconnected
ERROR 4 Invalid command or command line too long
NO DIALTONE 6 No dial tone, dialling impossible, wrong mode
BUSY 7 Remote station busy
CONNECT 2400 10 Link with 2400 bps
CONNECT 4800 30 Link with 4800 bps
CONNECT 9600 32 Link with 9600 bps
CONNECT 14400 33 Link with 14400 bps
CONNECT 2400/RLP 47 Link with 2400 bps and Radio Link Protocol
CONNECT 4800/RLP 48 Link with 4800 bps and Radio Link Protocol
CONNECT 9600/RLP 49 Link with 9600 bps and Radio Link Protocol