Specifications

AT command set for S45 Siemens mobile phones and modems
_________________________________________________________________________________________
__________________________________________________________________________________________
Siemens Document No.: A30880-A10-A001-3-D376
Revision: 1.8
Revision Date: 30. November, 2001
10
Table 2-3 lists all the supported AT commands for FAX services in alphabetical oder:
Command Function Page
AT+ FBADLIN Define or read number of bad lines 67
AT+ FBADMUL Define, read or test number of bad lines 68
AT+ FBOR Query the bit order for receive mode 68
AT+FCIG Query or set the Local polling id 69
AT+FCLASS Select, read or test FAX service class 70
AT+FCQ Control Copy Quality 69
AT+ FCR Capability to receive 70
AT+FDCC Select service for MO SMS messages 71
AT+FDFFC Data Compresssion Format Conversion 72
AT+FDIS Query or set session parameters 73
AT+FDR Begin or continue phase C data reception 74
AT+FDT Data Transmission 75
AT+FET End a page or document 75
AT+FK Kill operation, orderly FAX abort 76
AT+FLID Query or set session parameters 76
AT+FMDL Identify Product Model 76
AT+FMFR Request Manufacturer Identification 77
AT+FOPT Set bit order independently 77
AT+FPHCTO DTE Phase C Response Timeout 77
AT+FREV Identify Product Revision 78
AT+FRH Receive Data Using HDLC Framing 78
AT+FRM Receive Data 78
AT+FRS Receive Silence 79
AT+FTH Transmit Data Using HDLC Framing 79
AT+FTM Transmit Data 79
AT+FTS Stop Transmission and Wait 80
AT+FVRFC Vertical resolution format conversion
Fehler!
Textma
rke
nicht
definie
rt.
Table 2-4: Supported commands according to ITU-T Recommendation V.25 ter