User Manual

4/14
Building Technologies RXC34.1 – Room controller, basic module CA2N3847en_02
12.01.2007
80049
Removing the terminal cover
Label
Bar code, Code 39
(ID number)
Protection standard
Temperature range
(0 … 50 °C)
Observe notes
in this document
Neuron ID
Factory-loaded
application
Definitive
application
Location
3847Z01
Options for use of the labeling fields “Appl.” and “Loc.”:
− Handwritten entry of location and currently loaded application
or
− Printed adhesive label (printed from the RXT10 commissioning and service tool)
The connection terminals for the LonWorks® bus are detachable plug-in terminals. All
other terminals are fixed.
• The cable restraints on the housing base
must be used for the connections to relay
terminals 23 … 26. The conductors must be
secured with cable ties (see diagram).
• For safety reasons, the mains voltage (230
VAC) and the SELV for the two relay
contacts (terminals 23 … 26) must not be
combined.
80170
The RXC34.1 controller communicates with other devices via the following interfaces:
• LonWorks® bus (terminals CLA and CLB) for communication with:
− The PXR system controller or the NIDES.RX interface (to DESIGO)
− Other DESIGO RXC controllers
− LONMARK®-compatible third-party devices (e.g. occupancy sensors)
Note
Connection terminals
STOP
Caution
Communication