User Manual

62/90
Building Technologies Integration of DESIGO™ RXC CM2Z8338en_01
Building Automation Engineering 12.06.2006
4.9.1 Defining groups in GroupConfig.COL
Edit the GroupConfig.COL file as indicated in the table below:
Element Entries
DATA -9
Enter a line for each group, using the format indicated above the
input lines. Each line must start with DATA and end with the
terminator “ –9 ”.
DATA –9 at the end of the inputs terminates the definition of the
groups.
HVAC groups HVAC groups:
Group numbers 1 .. 200, and max. 20 rooms per group
Important:
A room must not be assigned to more than one HVAC group.
TED groups TED groups:
Group numbers 1..200, EFORM parameters in TED (see Part 3 of
the documentation on FLN Points).
Blind groups Blind groups:
Group numbers 1..100, with logical priorities assigned in
accordance with the plant functions.
Light groups Lighting groups:
Group numbers 101.. 200, priorities as above
TTY interface to
NIDES.RX
Enter the TTY interface to the NIDES.RX.
If GroupConfig.COL is not edited
– there will be no groups (HVAC, TED, blinds, lighting) and
– TTY1 will be assigned to the NIDES.RX as the default.
Unedited TSK112