User Manual

51/90
Building Technologies Integration von DESIGO™ RXC in VISONIK CM2Z8338en_01
Building Automation Engineering 12.06.2006
4 Engineering
4.1 Overview
This section concerns the engineering required to integrate the DESIGO RXC system
into VISONIK BPS. The key areas covered are:
– Data flow from the plant to the VISONIK data points
– Engineering procedure
– The configuration of groups for HVAC, blinds and lighting
– Single-parameter integration
4.2
From the application to the TEC data points...............................................52
4.3 Overall engineering procedure ...................................................................54
4.4 Workflow for VISONIK RXC integration......................................................54
4.5 Entering the location text in the RXT10 ......................................................56
4.5.1 Content and format of the location text.......................................................57
4.6 Selecting the NIDES binding template........................................................59
4.7 VISONIK data structures for integration......................................................59
4.8 Defining groups...........................................................................................61
4.8.1 Defining groups in GroupConfig.COL .........................................................62
4.9 Example with HVAC, blind and lighting groups ..........................................63
4.9.1 Edited GroupConfig.COL for the example ..................................................64
4.9.2 Lighting and blind group priorities...............................................................65
4.10 Integration of single parameters .................................................................66
4.10.1 Mapping table for NIDES.RX outputs .........................................................68
4.10.2 Mapping table for NIDES.RX inputs ...........................................................74
Introduction
Contents of this section