User Manual

16/90
Building Technologies Integration von DESIGO™ RXC in VISONIK CM2Z8338en_01
Building Automation Integration overview 12.06.2006
2.7 Room operation via the Intranet
From 2006, the room operation via the intranet is not available any more.
Room operation via the Intranet is designed for office buildings with PC networks
installed. In these circumstances, instead of wall-mounted room units, users can
operate the room from their office PC via an Internet browser.
The diagram below shows the room units in the DESIGO RXC range, and their
functions.
Function
Type 1
Type 2
Display current room temperature
9 9
Read/write room operating mode
(Standby / Auto)
–-
9
Read/write room unit setpoint adjustment
9 9
A separate template is available for integration of data points for Intranet room
operation.
Note the following in relation to Intranet room operation:
– By definition, only the room unit for the master controller in the room is operated.
– The setpoint adjustment is limited to the range –3K to +3K.
Phased out
Introduction
Room units and
functions
Binding Template
Notes
.
.
.
.
.
.
.
.