User Manual

Building Automation
HVAC Products
Legal disclaimer: This declaration is for information purposes only.
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does
not assume liability for any error or any consequences which may arise from the use of this information to the
maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CA2E3830en
26.04.02 page 2 of 2
Materials
total weight of device
148 g
Plastics ASA+PC, halogen-free, fiberglass-free front, rotary knob
50 g
ABS terminal base
32 g
PC
light guides
<1 g
PA66 support ring
1g
Silicone rubber with conductive area support ring
4g
Metals steel
screw
1g
Circuit board with
components
FR4, containing halogens, SnPb solder circuit board with components
57g
Special components
Terminal strip
in terminal base
(14 g)
Telephone plug on the circuit board (2 g)
Transformer
on the circuit board
(9 g)
NTC sensor on copper support in the housing front
2g
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Notes
Environmental benefits
Minimum consumption of electricity.