User Manual

2/12
Siemens RXC10 – Room controller CA2N3830en_06
Building Technologies 2015-12-23
In conjunction with a building automation and control system, the RXC10 controller can
also be used as a universal input module, e.g. to register the room temperature from
digital signals or a setpoint reset unit.
In this case, the controller is loaded with basic application 00010. The inputs can then
be interrogated via the building automation and control system.
Functions
The controller functions are determined by the selected application and its parameters,
and by the input/output configuration.
For a detailed description of functions, refer to the Desigo RXC applications library.
(V1: CA2A3810, V2:CA110300).
When Desigo RXC is integrated into a building automation and control system,
additional functions become available, such as time scheduling, central control of
setpoints etc. (refer to the Desigo INSIGHT documentation for further information).
Types
Product No.
Stock number
Designation
RXC10.5/00010 S55373-C110 Room controller
Ordering
When ordering, please specify the quantity, product name, type code and
application.The controller is loaded with basic application 00010.
Example:
30 Room controllers RXC10.5/00010
Compatibility
The RXC10 controller can be used in conjunction with the Siemens field devices.
For details, refer to the RX hardware overview, CA2N3804.
Mechanical design
The RXC10 controller comprises a housing base with connection terminals and a cover
incorporating the printed circuit board and the operator controls. The controller also has
a tool socket, a service LED and a service pin.
Use as an I/O module