User Manual

12
Combined applications
The HVAC applications covered by the modular RXC30, RXC31 and RXC39 controllers
can be combined with lighting and blind control (extension modules RXC40 and
RXC41).
The combined application consists of an HVAC application and one or more electrical
functions.
Examples:
Appl.
HVAC
Appl.
Electrical function Controller
Lighting
on/off
1)
Lighting
dimming
Blind
up/down
2)
RXC30 RXC31 RXC40 RXC41
INT01 CLC02
3)
2 x 1
INT02 CLC02
3)
4 x 1 1
INT03 CLC02
3)
2 x 2 x 1 1
INT04 CLC02
3)
2 x 2 x 1 1
INT05 CLC02
3)
2 x 4 x 1 2
etc.
INT10 VAV08
4)
2 x 1 1
INT11 VAV08
4)
4 x 1 2
INT12 VAV08
4)
2 x 1 1
INT15 VAV08
4)
2 x 2 x 1 1 1
etc.
1) With or without daylight sensor via LON bus, as required
2) With or without slat adjustment, as required
3) CLC02: Chilled ceiling and radiator-type heating
4) VAV08: Single duct supply and extract air system with radiator
The flexible room unit for made-to-measure operation
The flexible room unit was designed specifically for the operation of combined
applications (see pages 8 and 9).
The unit is loaded with an application for operation of lighting and blinds, and fitted with
the appropriate pushbuttons.
The available applications are described in the Desigo RXC application library (CA110300).
The flexible room unit can be ordered as follows:
QAX50: with pushbuttons for HVAC, on / off control of lighting and control of blinds
QAX51: with pushbuttons for HVAC, dimming control of lights and control of blinds
The appropriate application is downloaded by means of the RXT10 commissioning and
service tool.
Special applications
If the existing Desigo RXC standard applications do not meet the client's requirements
concerning functionality and combination of functions, HQ can realize special
applications. Please write a service request, using the request form on the intranet.
T
70225
LON
Room controller + extension modules