Operating Instructions
Table Of Contents
- RXB (KNX) applications library
- RXB Description of functions for FC10, FC11, FC12, FC13
- Table of contents
- 1 Introduction
- 2 Definitions / Tools
- 3 Select communication mode
- 4 Applications, parameters
- 5 Room operating modes
- 5.1 Description
- 5.2 Overview
- 5.3 Determine the room operating mode in Desigo (S-mode)
- 5.3.1 Local control of room operating mode via a window contact
- 5.3.2 Central control of room operating mode via input from the Use time schedule
- 5.3.3 Central and local control of room operating modebased on occupancy
- 5.3.4 Central control of room operating mode viathe Room operating mode time schedule
- 5.3.5 Local control of room operating mode with a room unit
- 5.3.6 Local control of room operating mode via the Temporary Comfort mode input
- 5.3.7 Effective room operating mode
- 5.3.8 Desigo examples
- 5.4 Determine the room operating mode with third-party products (S-mode)
- 5.4.1 Local control of room operating mode via the window contact input
- 5.4.2 Central control of room operating mode via the Room operating mode time schedule
- 5.4.3 Central control of room operating mode via the Use and Occupancy time schedules
- 5.4.4 Central and local control of room operating modebased on occupancy
- 5.4.5 Local control of room operating mode with a room unit
- 5.4.6 Local control of room operating mode via the Temporary Comfort mode input
- 5.4.7 Effective room operating mode
- 5.4.8 Third-party (S-mode) examples
- 5.5 Determine the room operating mode with Synco (LTE mode)
- 5.5.1 Local control of room operating mode via the window contact input
- 5.5.2 Central control of the room operating mode via Enable Comfort
- 5.5.3 Central control of room operating mode via Room operating mode input
- 5.5.4 Local control of room operating mode via presence detector
- 5.5.5 Local control of room operating mode with a room unit
- 5.5.6 LTE-Mode Examples
- 5.6 Determine the room operating mode without a bus (stand-alone)
- 6 Setpoint calculation
- 7 Temperature measurement
- 8 Control sequences
- 9 Fan control
- 10 Master/slave
- 11 General and central functions
- 11.1 Send heartbeat and receive timeouts
- 11.2 Digital inputs
- 11.3 Temporary Comfort mode
- 11.4 Presence detector switch-on and switchoff delay
- 11.5 Heating and cooling demand
- 11.6 Heating/cooling signal output
- 11.7 Special functions
- 11.8 Boost heating (Morning Warmup, 2)
- 11.9 Night purge (Night Purge, 4), (FNC10, FNC12)
- 11.10 Precooling (Precool, 5)
- 11.11 Test mode (Test, 7)
- 11.12 Emergency heating (Emergency Heat, 8)
- 11.13 Rapid ventilation (Fan only, 9)
- 11.14 Free cooling (Freecool, 10)
- 11.15 Alarm
- 11.16 Reset the setpoint shift
- 11.17 Free inputs/outputs
- 11.18 Software version
- 11.19 Device state
- 12 Room unit
- 13 KNX information
- 14 FAQs
- 15 Integrate RXB in Desigo/Synco
- 15.1 Case 1: Integration into Synco
- 15.2 Case 2: Integration into Desigo
- 15.3 Case 3: Display in Desigo, with shared Synco time scheduler
- 15.4 Case 4: Display in Desigo/Synco, with shared Synco time scheduler
- 15.5 Case 5: Display in Desigo, andseparate time schedulers
- 15.6 Case 6: Separate display, andseparate time schedulers
- 15.7 Case 7: Separate display, andshared Synco time scheduler
- 16 Working with different tools
6/182
Siemens RXB (KNX) application library RXB Description of functions for FC-10, FC-11, FC-12, FC-13 CM110385en_08
Building Technologies Introduction 2013-06-17
1 Introduction
1.1 Validity of the documentation
Devices with production date up to approx.
December 2007
Devices with procuction date
from approx. January 2008
RXB21.1/FC-10 Index A
RXB21.1/FC-11 Index A
RXB22.1/FC-12 Index A
QAX34.3 Series A - C
RXB21.1/FC-10 Index B and higher
RXB21.1/FC-11 Index B and higher
RXB22.1/FC-12 Index B and higher
RXB39.1/FC-13
Index A and higher
QAX34.3 Series D and higher
– Documentation revisions _01 and _02 apply.
– Use old device descriptions (for ACS) and old
product data (for ETS)!
– Documentation revisions _03 and higher apply.
– Use new device descriptions (for ACS) and new
product data (for ETS)!
1.2 Revision history
CM110385en_08
06.2013
• DC 0...10 V valve actuators and fans (RXB39.1)
• 5.5.4 Priority of presence detector
•
Screenshots ACS and ETS4
CM110385en_07
08.03.2012
•
11.2 HandyTool Parameters 113, 114
CM110385en_06
15.09.2010
• 8.1.4 Electromechanical actuators, RXB21.1: Output Y3 not Y2 for Cooling
• 8.4.2 2-pipe fan-coils with electric reheater
• 9.1, 9.2.1 Prevent switching the fan off while el. re-heater is active
CM110385en_05
28.02.2009
• 7.1.3 Temperature averaging
•
8.5.5 Downdraft compensation
CM110385en_04 14.03.2008
• 5.3.3, 5.4.4 Presence detector
• 8.1.4 Offset in the case of mechanical actuators (3rd party)
• 10.1.3, 10.2.3 No dew point sensor in FNC
• 11.15.2 Alarm LTE: Alarm codes
•
13.9 Table "HandyTool enumerations"
CM110385en_03
30.11.2007
• 1 New section
• 1.7 Bus supply
• 2.6 Parameter upload / download
• 2.7 Periphery test
• 5 Room operation mode
• 6 Setpoint calculations
• 7.1 Temperature measurement
• 8.1.3 Heating/cooling output
• 8.1.4 Actuator type selection
• 8.1.6 Valve exercising feature
• 8.5 Floor heating: the control parameters are not optimized.
• 8.5.2 Downdraft compensation
• 8.7 Room supply air cascade control (FNC08): figure
• 9.2.1 Fan speeds and control
• 10 Master/Slave (window switch, presence detector, dewpoint sensor)
• 11.7 Disabling of the special functions
• 11.12 Emergence heating
• 11.17 Free inputs/outputs
• 11.18,Software-version, 11.19 Device status
• 13.1 Reset and startup response
• 13.2 LED flashing pattern
• 13.7, 13.8, 13.9 HandyTool parameters with page numbers and enumerations
•
14 FAQ