User Manual

ManualsBrandsSiemens ManualsBuilding automationRWG5.M2 bash upgrade introduction

EPD - Type II

Based on ISO 14021

S55370-C173 RWG5.M2 M/B convertor

Designation

Product line, product range

Beijing Siemens Cerberus Electronics Ltd.

No.1 FengZhiDongLu, XiBeiWang,HaiDian District

100094, Beijing / China

Management System since by

ISO 9001 (Quality) 06.01.2001 LPCB

ISO 14001 (Environment) 05.07.2005 SGS

OHSAS 18001 (OH&S) 12.12.2011 SGS

Typical energy consumption 48kWh/a

Maintenance

Fire protection according to

Fire load 3MJ

20-PAP Corrugated fibreboard Carton-box 195g

20-PAP Corrugated fibreboard Packing insert 45g

5-PP Polypropylene Plastic bag

Packaging

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the

environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the

product and process planning phases by complying with Siemens EP Standard (former SN 36350) "Specifications on

Environmentally Compatible Product and System Design".

Product use

Risk of fire

Product

Environmental

Product Declaration

Type of equipment /

Product No.

Not necessary

None

Type of equipment /

Product No.

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Type of equipment / Product No. Product Type of equipment / Product No. S55370-C173 RWG5.M2 M/B convertor Designation Product line, product range Process control Beijing Siemens Cerberus Electronics Ltd. No.1 FengZhiDongLu, XiBeiWang,HaiDian District 100094, Beijing / China Management System since by ISO 9001 (Quality) 06.01.2001 LPCB ISO 14001 (Environment) 05.07.2005 SGS OHSAS 18001 (OH&S) 12.12.
PAGE 2
EPD - Type II Based on ISO 14021 EPE EPE Bottom case EPE EPE Cover Notes on disposal recyclable Total weight of device Materials 791g The total weight of a device may deviate from the total of the weights of all individual components due to rounding. Plastics PC Film panel Metals Steel; chromeplate screw,nut: M4x8,M3x6,M3,M4 Steel; black oxidation screw M3x5 Cu alloy; M3x17.5 Cu stud 22.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; TBBA; solder SnAgCu MB-PCBA 82g FR4; TBBA; solder SnAgCu SUB-PCBA 95g Special components (part of the assembled PCB) [g] Total weight of device S55370-C173 *Variant parts list 791 Film panel 2 screw,nut: M4x8,M3x6,M3,M4 4 screw M3x5 6 Restricted Page 3/6
PAGE 4
EPD - Type II Based on ISO 14021 M3x17.5 Cu stud 22.5 12 40x60x5mm heat dissipation block 26 54mm DIN card rail 24 Bottom hosing 187 Cover housing 216 70 Small cover housing 33 CBL-USB-USB-AM/MICRO-USB-1m/RoHS 20*20*2mm，15*25*2.
PAGE 5
EPD - Type II Based on ISO 14021 Packaging Carton-box [g] Packing insert Plastic bag 195 45 7 EPE Bottom case 65 EPE Cover 25 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws.
PAGE 6
EPD - Type II Based on ISO 14021 Legal Disclaimer: This declaration is for information purpose only. This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.