Environmental Declaration

ManualsBrandsSiemens ManualsBuilding automationRWG Universal Controller

EPD - Type II

Based on ISO 14021

RWG1.M12D Universal smart controller

RWG1.M12 Universal smart controller

RWG1.M8 Universal smart controller

Product line

SRA

Environmental

Product Declaration

Type of equipment /

Product No.

Product

Product line

Beijing Siemens Cerberus Electronics Ltd.

No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District

100094, Beijing, China

Management System since by

ISO 9001 06.01.2001 LPCB

ISO 14001 05.07.2005 SGS

OHSAS 18001 12.12.2011 SGS

Typical energy consumption 62kWh/a

Maintenance

Fire protection according to

Fire load 7MJ

20-PAP Corrugated fiber board Gift Box 58g

SRA

Not necessary

EN 60730-1

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the

environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the

product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350) "Specifications on

Environmentally Compatible Product and System Design".

Product use

Risk of fire

Packaging

Unrestricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Type of equipment / Product No. Product RWG1.M12D Universal smart controller RWG1.M12 Universal smart controller RWG1.M8 Universal smart controller Product Product line Process control SRA Beijing Siemens Cerberus Electronics Ltd. No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District 100094, Beijing, China Management System since by ISO 9001 06.01.2001 LPCB ISO 14001 05.07.2005 SGS OHSAS 18001 12.12.
PAGE 2
EPD - Type II Based on ISO 14021 Notes on disposal recyclable Total weight of device Materials variant *) see below The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; TBBA; solder SnAgCu Main PCBA FR4; TBBA; solder SnAgCu Sub HMI PCBA Special components (part of the assembled PCB) RWG1.M8 RWG1.M12 [g] Total weight of device RWG1.
PAGE 4
EPD - Type II Based on ISO 14021 Cable / Wire 6 terminals 38 38 38 Main PCBA 89 89 89 Sub HMI PCBA 47 Fire load [MJ] 7 7 7 [kWh/a] 62 62 62 Typical energy consumption Special components (part of the assembled PCB) [pcs] Unrestricted Page 4/6
PAGE 5
EPD - Type II Based on ISO 14021 Packaging Gift Box [g] 58 58 58 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws.
PAGE 6
EPD - Type II Based on ISO 14021 Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law. Please contact your local Siemens branch office to get further information on environmental aspects and disposal. A5W90001146-C Unrestricted Page 6/6 12.12.