RWB29 Programmer 7 Day Programming
RWB29 Controls ON WHEN LIT EXTEND ADVANCE RESET MENU/SELECT UP & DOWN BACK/EXIT
Introduction This booklet gives you easy to follow instructions allowing you to set your RWB29 Programmer to the 7 Day, (different times every day) program. 1 2 3 4 5 6 7 8 9 Contents How do I change/set the ON/OFF times? How do I review the current ON/OFF times? How do I copy the ON/OFF times? What do the switching options mean? How do I select my Switching Options? How do I set my holiday program? How do I activate my holiday program? What do the buttons do? Notes on RWB29 settings.
RWB29 7 Day 3:37 CH OFF PM MAN Mon Tue Wed Thu Fri Sat Sun 10:32 AM 2P MENU At first installation display will show as above unless reset is activated. At first installation display will show as above when reset is activated.
How do I change/set the ON/OFF times? • Press left hand button MENU 3:37 HW CH 3:37 PM SET CH SELECT BACK 3:37 CH PM 8:30 AM SET 1st SELECT (continued on next page) PM MAN MAN MENU • Press top middle button until SET PROGRAM is shown Press left hand button SELECT display will show SET CH • Press left hand button SELECT display will show SET MONDAY alter day using top middle button , when correct day is shown press left hand button SELECT display shows OFF OFF ON BACK
To change 1st ON time for CH press SELECT, time will flash, change times by using +/- , when desired time is in the display press ENTER display will show 12:00 SET THE TIME ENTER +/- BACK 3:37 • Repeat as above until last OFF time for CH is entered, press right hand button BACK, display will show press middle top button SET HW is shown, repeat as above until all HW times have been entered, if you want to go to next day press top middle button and repeat as above if not, press BACK twice, then press EXIT
How do I review the current ON/OFF times? • Press left hand button MENU, press top middle button until REVIEW PROG is shown • Press left hand button SELECT display shows Press VIEW, MONDAY shows press VIEW • 1st ON time for Central Heating (CH) will be shown (continued on next page) 3:37 HW CH OFF OFF PM MAN MAN REVIEW PROG SELECT EXIT CH PROGRAM VIEW BACK 10:30 AM CH VIEW 1st ON BACK
• Press top middle button 1st OFF will be shown • Continue above action until all times have been reviewed, press right hand button BACK. Press bottom middle button to view TUESDAY and continue until all days and times for central heating have been reviewed. • Press right hand button BACK twice, then press top middle button HW PROGRAM will be shown, repeat actions as above to review all days and times for Hot Water.
How do I copy the ON/OFF times? To copy times from one day to the next...
• Press SELECT, continue pressing SELECT until all days you want to copy are entered COPY TUE➞WED SELECT BACK • Press right hand button BACK • Press top middle button SET HW will be shown, repeat previous instructions to copy HW days and times COPY SAT➞SUN SELECT BACK • Press right hand button BACK • Press right hand button EXIT to return to MENU The copy option can be used after completion of any days programming 3:37 CH OFF MENU PM MAN
What do the switching options mean? AUTO This means that the RWB29 will switch ON and OFF according to the programmed times MANUAL OFF This means that the RWB29 will be permanently OFF MANUAL ON This means that the RWB29 will be permanently ON ONCE This means that the RWB29 will switch ON at the first ON time and switch OFF at the last OFF time you have programmed ignoring any ON/OFF times in between. This is also referred to as All Day.
3:37 How do I select my four switching options? PM SET STATUS SELECT EXIT • Press left hand button MENU Display shows • Press left hand button SELECT Display shows CH STATUS SELECT BACK • Press bottom middle button your selection is displayed (CH, HW or CH+HW) until • Press left hand button SELECT Display shows (continued on next page) MANUAL OFF ENTER BACK
• Press top middle button until correct switching option is displayed MANUAL OFF ENTER BACK AUTO* MANUAL OFF* MANUAL ON* ONCE* *see previous page for details • Press left hand button ENTER, repeat for other selections (HW, CH etc) CH+HW STATUS SELECT BACK • Press right hand button BACK • Press right hand button EXIT Display shows 3:37 HW CH OFF OFF MENU PM MAN MAN
How do I set my holiday program? • Press left hand button MENU • Press top middle button until SET HOLIDAY is shown • Press left hand button SELECT display shows number of holiday days will flash, change amount of days (1-99) by using +/- , when desired amount of days is in the display press left hand button ENTER, then right hand button EXIT to return to MENU 3:37 CH OFF PM MAN MENU 3:37 CH OFF PM MAN SET HOLIDAY SELECT EXIT 20 ADJUST DAYS ENTER +/- BACK
How do I activate my holiday program? • Press left hand button MENU SET STATUS is shown, press SELECT • Press top middle button until HOLIDAY is shown • Press left hand button SELECT display will flash as shown your system is now in HOLIDAY mode (OFF) and will countdown the amount of days you have set it for, at the end of which it will automatically go back to your normal set program. You can also press CANCEL to return to normal program mode.
What do the buttons do? ADV (ADVANCE) This brings forward the next switching time, for example:(a) if your times were ON 7am and OFF 9am - ON 5pm and OFF 10pm and you pressed the ADV at 4pm your heating would come ON straight away and go OFF at 10pm. (b) if your times were ON 7am and OFF 9am - ON 5pm and OFF 10pm and you pressed the ADV at 9pm your heating would go OFF straight away and come ON at 7am the next morning.
Notes on RWB29 settings. Your RWB29 comes with the correct day of the week, date and time preset, it will also automatically switch to and from daylight saving hours. Should you at anytime or for any reason need to manually adjust the clock settings, please refer to the following pages.
To manually adjust the clock? • Display shows Press MENU Mon CH 3:37 OFF PM MAN MENU • Press bottom middle button until display shows Press SELECT • Alter time using +/buttons to scroll, when correct time is shown press left hand button ENTER display shows (continued on next page) 12:00 PM SET TIME/DAY SELECT EXIT 12:00 PM SET YR 2006 ENTER +/- BACK
• Alter year using +/buttons, when correct year is shown press left hand button ENTER, display shows • Alter month using +/buttons to scroll, when correct month is shown press left hand button ENTER display shows 12:00 SET MONTH 09 ENTER +/- BACK 12:00 PM SET DAY 09 ENTER +/- BACK Mon • Alter day of the month using +/buttons, when correct day of the month is shown press ENTER then press right hand button EXIT display shows PM CH 3:37 OFF MENU PM MAN
What is a programmer? ... an explanation for householders Programmers allow you to set ‘On’ and ‘Off’ time periods. Some models switch the central heating and domestic hot water on and off at the same time, while others allow the domestic hot water and heating to come on and go off at different times. Set the ‘On’ and ‘Off’ time periods to suit your own lifestyle.
NOTES
NOTES
