User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
154 Viewing Serial Port Statistics
Parameter Description
The number of packets transmitted on the connection.
Section 5.4.21
Viewing Serial Port Statistics
To view statistics for serial ports, navigate to Serial Protocols » View Serial Port Statistics. The Serial Port
Statistics table appears.
Figure 114: Serial Port Statistics Table
This table displays the following information:
Parameter Description
Port Synopsis: 1 to maximum port number
The port number as seen on the front plate silkscreen of the switch.
Protocol Synopsis: Any 15 characters
The serial protocol supported on this serial port.
Rx Chars Synopsis: 0 to 4294967295
The number of received characters.
Tx Chars Synopsis: 0 to 4294967295
The number of transmitted characters.
Rx Packets Synopsis: 0 to 4294967295
The number of received packets.
Tx Packets Synopsis: 0 to 4294967295
The number of transmitted packets.
Packet Errors Synopsis: 0 to 4294967295
The number of packets received from this port and discarded (error in protocol, CRC or
routing information not found).
Parity Errors Synopsis: 0 to 4294967295
The number of Parity Errors.
Framing Errors Synopsis: 0 to 4294967295
The number of Framing Errors.
Overrun Errors Synopsis: 0 to 4294967295