User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
152 Viewing Statistics for Serial Protocol Links
Figure 111: TIN Dynamic Address Table
This table displays the following information:
Parameter Description
Address Synopsis: Any 31 characters
The remote device address.
Location Synopsis: ###.###.###.### where ### ranges from 0 to 255
The IP Address of the remote host.
IP Port Synopsis: 1 to 65535
The remote port number through which remote device sent a UDP datagram or TCP
connection is established
RSSI Synopsis: -128 to 0 or { N/A }
The signal strength indicator received from wayside data radio. N/A for TIN Mode 1.
Aging Time Synopsis: 0 to 1000 s
The amount of time since the last packet arrived from the device. Once this time exceeds
the Aging Timer setting for protocol, the device will be removed from the table. This value is
updated every 10 seconds.
Section 5.4.19
Viewing Statistics for Serial Protocol Links
To view statistics for serial protocol links, navigate to Serial Protocols » View Links Statistics. The Links
Statistics table appears.
Figure 112: Links Statistics Table
This table displays the following information: