User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
136 Configuring the WIN and TIN Protocols
14
13
1
2
3
4
5
6
7
8
9
10
11
12
Figure 92: WIN and TIN Form
1. TIN Mode Box 2. TIN Transport Options 3. WIN Transport Options 4. TIN IP Box 5. WIN IP Box 6. Messaging Aging Timer
Box 7. Address Aging Timer Box 8. Broadcast Addresses List 9. Unicast Addresses List 10. Link Stats Options 11. WIN
DSCP Box 12. TIN DSCP Box 13. Apply Button 14. Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
TIN Mode Synopsis: 1 to 2
Default: 1
The TIN Protocol running mode.
TIN Transport Synopsis: { TCP, UDP, Disabled }
Default: UDP
The network transport used to transport protocol data over an IP network.
WIN Transport Synopsis: { TCP, UDP, Disabled }
Default: UDP
The network transport used to transport protocol data over an IP network.
TIN IP Port Synopsis: 1024 to 65535
Default: 51000
The local port number on which the TIN protocol listens for connections or UDP
datagrams.
WIN IP Port Synopsis: 1024 to 65535
Default: 52000
The local port number on which the WIN protocol listens for connections or UDP
datagrams.
Message Aging Timer Synopsis: 1 to 3600 or { Disabled }
Default: Disabled