User guide

RUGGEDCOM ROS
User Guide
Chapter 1
Introduction
Overview 1
Introduction
This chapter provides a basic overview of the ROS software. It describes the following topics:
• Section 1.1, “Overview”
• Section 1.2, “Security Recommendations and Considerations”
• Section 1.3, “Available Services by Port”
• Section 1.4, “SNMP Management Interface Base (MIB) Support”
• Section 1.5, “SNMP Traps”
• Section 1.6, “ModBus Management Support”
• Section 1.7, “Certificate and Key Requirements”
Section 1.1
Overview
Welcome to the ROS Software User Guide for the RMC30. This Guide describes the wide array of carrier grade
features made available by ROS (Rugged Operating System). These features include:
IMPORTANT!
The RMC30 is not intended for use or resale as online control equipment in hazardous, high-risk
environments that require fail-safe performance, such as nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines or weapons systems, in which
the failure of the software could result in death, personal injury, or severe physical or environmental
damage.
Cyber Security Features
• Muti-level user passwords
• SSH/SSL (128-bit encryption)
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption
Management Features
• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote Monitoring (RMON)
• Rich set of diagnostics with logging and alarms