User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
106 Adding a Security-to-Group Map
1
Figure 65: SNMP Security to Group Maps Table
1. InsertRecord
2. Click InsertRecord. The SNMP Security to Group Maps form appears.
64
5
3
2
1
Figure 66: SNMP Security to Group Maps Form
1. Security Model Box 2. Name Box 3. Group Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
SecurityModel Synopsis: { snmpV1, snmpV2c, snmpV3 }
Default: snmpV3
The Security Model that provides the name referenced in this table.
Name Synopsis: Any 32 characters
The user name which is mapped by this entry to the specified group name.
Group Synopsis: Any 32 characters
The group name to which the security model and name belong. This name is used as an
index to the SNMPv3 VACM Access Table.
4. Click Apply.