User guide

Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
102 Adding an SNMP User
1
Figure 60: SNMP Users Table
1. InsertRecord
2. Click InsertRecord. The SNMP Users form appears.
12
10
11
9
8
7
6
5
4
3
2
1
Figure 61: SNMP Users Form
1. Name Box 2. IP Address Box 3. v1/v2c Community Box 4. Auth Protocol Box 5. Priv Protocol Box 6. Auth Key Box
7. Confirm Auth Key Box 8. Priv Key Box 9. Confirm Priv Key Box 10. Apply Button 11. Delete Button 12. Reload Button
NOTE
ROS requires that all user passwords meet strict guidelines to prevent the use of weak passwords.
When creating a new password, make sure it adheres to the following rules:
• Must not be less than 6 characters in length.
• Must not include the username or any 4 continuous alphanumeric characters found in the
username. For example, if the username is Subnet25, the password may not be subnet25admin
or subnetadmin. However, net25admin or Sub25admin is permitted.